|
The
machine is supplied complete
with:
-
Steel welded painted frame, "balcony" type built to contain the
motorization and drives for
the various groups. : The
“balcony” frame is ideal
to grant easy access from
operator side;
-
The V300 complies with GMP standards;
-
Ergonomic carton magazine with high capacity. The magazine is mounted on
guides and can be moved
inside the machine to
facilitate size changeover.
Carton advancement is
carried out by motorized
belt; the magazine is
adjustable according to
carton size through digital
indicators; a minimum load
check photocell is installed;
-
Carton pick-up, erect and transport in transport chains by means of 2
rotary arms “planetary”
type and pre-breaking
counter-suction unit. Vacuum
is produced by Venturimeters
on board of the 2 pick-up
arms.
-
Carton transport by means of toothed belts with pushing and contrast
teeth.
-
Product transport buckets mounted on transport toothed belt. Buckets are
mounted on axial carriage (carton
approaching). Size
adjustment is carried out
individually in a quick way.
-
Pusher holding carousel mounted on toothed belt; the advancement of each
single pusher for product
introduction in carton is
carried out by a cam.
As a standard there is the possibility to let the
pusher go on in axial mode
(no product introduction in
carton)
-
Vertical inner flaps folding unit;
-
Predisposition of carton closure (separate quote for either tuck-in or
glued end flaps closing
system);
-
Outfeed lateral belts with continuous motion;
-
Quick size change-over, digital indicators adjustments and reduced
changeover of parts in fixed
position ; the operation can
be achieved on the front
part of the machine . For a
complete size change-over on
the V 300 basic machine, the
max. time is of 15 minutes;
-
Electrical plant at European standards; the control panel is Touchscreen,
message color display;
-
Logic drive by Omron PLC;
(more
details available upon request)
|
